Arlington FB248SC T-Box for Suspended Ceiling Grids
Note: This units is for fans and fixtures up to 70lbs. They changed it from the catalog sheet and it comes with a metal gang box on the top as shown in the video below.
Metal hanger. For fans/fixtures up to 70 lbs. Includes Wire Grabber™ with braided drop wire support kit, installed NM cable connector, (2) #10-32-32 x 4" screws, grid cover.
Arlington F428SC T-Box for Suspended Ceiling Grids
Note: This box is for mounting fixtures less than 50lbs. It does not come with the metal gang box on the top.
Arlington's T-Box is the cost...
T-Grid T-Bar Box Hanger Bracket Adjustable to 8" Height
These 24in T-bar brackets have an adjustable 8in height. They are used with boxes that are 1-1/2in or 2-1/8in deep on metal or wood...
T-Grid T-Bar 48" Box Hanger Bracket Adjustable to 8" Height
These 48in T-bar brackets have an adjustable 8in height. They are used with boxes that are 1-1/2in or 2-1/8in deep on metal or wood...
T-Grid T-Bar Box Hanger Bracket for 1-1/2" or 2-1/8" Deep Box
These 24in T-bar brackets are used with boxes that are 1-1/2in or 2-1/8in deep on metal or wood studs for box positioning in walls and...
6ft. 14 gauge ceiling grid tie wires mount to ceilings and allow the installer to hang ceiling grids or support multiple electrical boxes, conduit hangers, and other cable support brackets. Concrete...
Caddy 512A T-Grid T-Bar Box 24" Hanger Bracket for 1-1/2" or 2-1/8" Deep Box
Adjustable height allows installation of double deep boxes, speaker cases and emergency light fixtures above...
