SB130 Non-Metallic Bushings for Metal Stud Grommet
These bushings will fit existing irregular shaped holes in metal studs, alleviating the need to punch holes in metal studs, weakening the structural member.
Use these bushings to comply with paragraph 300-4b(1) of the 2002 NEC code, which states that "in both exposed and concealed locations where nonmetallic-sheathed cables pass through either factory or field punched, cut, or drilled slots or holes in metal members, the cable shall be protected by bushings or grommets covering all metal edges and securely fastened in the opening prior to installation of the cable."
SB130 Non-Metallic Bushings for Metal Studs Pack of 100 Grommet
These bushings will fit existing irregular shaped holes in metal studs, alleviating the need to punch holes in metal studs, weakening...
Easy Snap Metal Stud Grommet
Install into pre-punched holes on metal studs to protect wires from sharp edges
2 push-in pins, and 2 holes per each grommet for snap- on design
No tools required
Arlington Insulating Bushing for Electrical Metal Tubing EMT Bushing White
Arlington's EMT insulating bushings protect cables from abrasion by EMT. Power, cable TV, computer data lines,...
Easy Snap Metal Stud Grommet with Anti Rattle Protection
Mfg discontinued
Install into pre-punched holes on metal studs to protect wires from sharp edges
2 push-in pins, and 2 holes per each...
Arlington FLBAF101 Adjustable Non-Metallic Floor Box for Installed Floors w/ Flip Lids
Low cost, clean, and neat adjustable floor boxes that fit most floor heights up to 2”.
Non-metalllic boxes...
