This 512-106 mode converter is designed to convert a 1310nm multimode fiber signal into a 1310nm single mode fiber signal and vice versa.
This converter is perfect if you are looking to extend your single mode fiber run into equipment that accepts only multimode fiber. This mode converter can be used in conjunction with our other single mode media converters and multimode media converters to convert your fiber into RJ45 copper media.
FastCAM Connectors are pre-polished, field-installable connectors that eliminate the need for hand polishing, bonding, or epoxy in the field. FastCAM connectors are available in LC, SC, or ST,...
LGX 6 Duplex SC/APC Fiber Adapter Plate Single Mode
This fiber adapter panel is loaded with 6 duplex single mode SC/APC connectors, giving a total of 12 ports. The panel snaps easily into any panel...
LGX 6 Simplex SC/APC Fiber Adapter Plate Single Mode
This fiber adapter panel is loaded with 6 simplex single mode SC/APC connectors, giving a total of 6 ports. The panel snaps easily into any panel...
LGX 6 Simplex SC/UPC Fiber Adapter Plate Single Mode
This fiber adapter panel is loaded with 6 simplex single mode SC connectors, giving a total of 6 ports. The panel snaps easily into any panel...
LGX 6 Duplex SC/UPC Fiber Adapter Plate Single Mode
This fiber adapter panel is loaded with 6 duplex single mode SC connectors, giving a total of 12 ports. The panel snaps easily into any panel...
LC QuickFiber Connector Single-mode 900um Fiber Terminator 10 Pack
QuickFiber Field Installable Connectors are used to terminate optical singlemode or multimode fiber on the job site. The QuickFiber...
