Fiber Optic Connector Cleaning Sticks

Fiber Optic Connector Cleaning Sticks

The Commercial or Standard Variety Pack (#MCC-VS) comes with the three most popular types types of fiber optic cleaning sticks used in commercial applications.

These sticks use high-purity fiberous nibs to wick liquids and grab particulate from end-faces, which boosts cleaning quality.

They are based on a fiberous polymer tip which is molded, not hand-wound. Molding provides a dimensional consistency impossible with other manufacturing processes, and ensures a optimal, slightly loose fit within the alignment sleeve.

This enables the tip to spin off-center and improves the cleaning quality — even on the smallest end-faces. During use, the tip’s fibers spread open to trap and hold particulate also.

The tip flexes to fit connector end-faces, so no extra tools or processes are required to clean those configurations. This lift-and-grab action is enhanced by the capillary action of the fibers in the tip, so the fibers wick up oils and solvents quickly.

20 for SC, 20 for ST, 10 for LC