Fiberglass Weatherproof Enclosure for Starlink® Satellite Router & Mesh Node with 24VDC to 120VAC Power Inverter Cooling Fan and 120 VAC Outlets

Features

• Internal 24VDC to 120VAC power inverter
• Multi function cradle designed to mount both the Starlink® router and Starlink® Ethernet adapter
• Integral cable management for Starlink® cables
• Plug-and-Play design, no electrical wiring required
• Thermostat controlled cooling fan with (2) 4” vents with rain shields and screens
• (4) Pre-wired 120VAC power outlets with pre-wired 5 ft. 3-prong power cord
• Rugged RF transparent fiberglass reinforced polyester FRP construction
• Weatherproof, UV stable and highly corrosion resistant
• Stainless steel hinge and quick release latches with padlock hasps
• NEMA Type 3R, 3RX / IP24 rated
• Includes cable glands and stainless steel enclosure mounting feet
• Optional pole mounting kit available
• Outer Dimensions: 15.7 x 13.8 x 10.5 Inches (401 x 352 x 268 mm)
• Inner Dimensions: 12.7 x 10.7 x 9.4 Inches (323 x 273 x 240 mm)

Industrial Grade Protection for the Starlink® Satellite Internet Router
Designed to provide the ultimate protection for the Starlink® WiFi Router, this fan cooled vented enclosure is ideal for rapid deployment because no wiring is required. Simply mount the enclosure and plug the pre-wired 5 foot power cord into a nearby outlet. The aluminum equipment mounting plate features four pre-wired 120VAC power outlets.

24VDC Power Operation
The 751-14VFD2-STAR1 includes a 24VDC to 120VAC power inverter installed inside the enclosure which allows it to be powered from 24VDC solar and battery power sources as well as ideal for use in mobile applications such as in yachts, RV's, commercial and military vehicles. The (2) 120VAC power outlets are pre-wired to the inverter for use with the Starlink® Satellite Internet Router. Included are (2) heavy duty pre-terminated power cords for connecting the inverter to a power source.

Multi Function Mounting Cradle
The Altelix Starlink® enclosure features an innovated multi function mounting cradle which is designed to easily mount both the Starlink® router and Starlink ® Ethernet adapter into one cradle. This mounting cradle also provides easy to use cable management for all the required cables.

Plug and Play Setup
This enclosure provides easy plug-and-play installation. Once the Starlink® router and Ethernet adapter are securely mounted inside the enclosure, connect the router's power supply to the internal 120VAC power outlet. Cable glands on the enclosure allow cables to be connected to the device. Simply plug the enclosure's 5 foot power cord into an outdoor outlet and you are up and running. The power cord can be easily removed, and the quick-connect terminal strip simplifies hard-wiring by a qualified installer.

Fan Cooling with Thermostat Control
This enclosure features two 4" vents and a thermostat controlled cooling fan which helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). Rain shrouds keep rain water from entering the enclosure while allowing ventilation for installed equipment. The fan is wired internally, leaving all 4 power outlets available for the Starlink® Router as well as for any additional installed equipment.

Extreme Protection Built to Last
This rugged JIC style NEMA box is molded from durable UV stable and corrosion resistant fiberglass reinforced polyester (FRP) with a UL94-5V flame rating. The FRP material is dent-proof, non-conductive and RF transparent so that it will not interfere with the WiFi signal range or coverage pattern of the Starlink® WiFi Router. It can be easily drilled and modified by the installer as needed. It features a gasketed door with stainless steel continuous hinge and stainless steel quick release latches with padlock hasps.

Mounting
Stainless steel brackets are included for secure wall mounting. Optional flange and pole mounting kits are available.