Single Pair Protection - Scale the protection to the system size. Protect only the lines requiring protection
Streamlined Installation- Eliminate redundant cross-connects by adding protection directly at the 66Block. Press fit protectors to theblock and attach the ground bar tothe protectors. A Screw Ground Lug also is required. (MGBSGL-1)
Sneak Current Protection - Protects against fires caused by overloads and power crosses
Cost Savings - Eliminate expensivefive-pin blocks and use economical66 Blocks
Optimum Protection - Available in a number of voltage ratings to match system operating voltages
Ideal for Retrofit Applications -Just remove the bridging clips from the block & replace them with the UltraLinx Protector, add the ground connection and the pair is protected
Lifetime Product Warranty - This surge protector shall be free of any defects in design, materials, or workmanship, or ITW Linx will repair or replace the defective product
Protects up to 4-Wires (2-pairs) per Jack. Using RJ-11/45 Connectors (2 In / 2 Out, Pins 3 & 6 and 4 & 5 Protected). Applications: Analog and Central Office lines for PBX or KSU...
Protection of 4 central office lines using a combination of 110 punch-down blocks and RJ-45 connector jacks. Versatility is the key as either punch down or modular cable can be used to connect the...
Route wires along concrete, brick, mortar, cinder blocks and other hard surfaces - without drilling Two specially-hardened drive pins securely fasten wires and prevent cord rotation ...
