Malleable Iron Beam Clamp 7/8" Jaw Opening 1/4-20 Threaded Holes
Malleable iron beam clamps with 7/8" jaw opening and 1/4-20 threaded holes are used with conduit hangers, bridle rings and drop 1/4-20 rods. They are tapped for rods on the bottoms and backs. Heavy duty beam clamps are used to hang medium, light, or heavy loads from structural beams. Their hardened cup point screw and malleable iron body will not distort or slip off beam edge when tightened.
Malleable Iron Beam Clamp 7/8" Jaw Opening 10-24 Threaded Holes
Malleable iron beam clamps with 7/8" jaw opening and 10-24 threaded holes are used with conduit hangers, bridle rings and drop 1/4-20...
J-WPBC S1/4-20 Threaded Pressed Beam Clamp
Provides a mounting base for quickly and easily fastening cable management hardware to an I-beam or girder
Features:
High-strength, zinc-plated pressed...
Angle Clip with 1/4" Hole and 1/4-20 Threaded Eyelet
The angle clip can be used for threaded rod or to hand a bridle ring or wire.
90 Degree Angle clip
1/4" Hole
1/4-20 Eyelet
Trailer I-Beam Clamps with Ground Wire Hole
A tin-plated bronze casting with teeth; brass hex thru-bolt with hole, brass set screw, and bronze lock washer.
Features and Benefits:
