Malleable Iron Beam Clamp 7/8" Jaw Opening 10-24 Threaded Holes
Malleable iron beam clamps with 7/8" jaw opening and 10-24 threaded holes are used with conduit hangers, bridle rings and drop 1/4-20 rods. They are tapped for rods on the bottoms and backs. Heavy duty beam clamps are used to hang medium, light, or heavy loads from structural beams. Their hardened cup point screw and malleable iron body will not distort or slip off beam edge when tightened.
Malleable Iron Beam Clamp 7/8" Jaw Opening 1/4-20 Threaded Holes
Malleable iron beam clamps with 7/8" jaw opening and 1/4-20 threaded holes are used with conduit hangers, bridle rings and drop...
Trailer I-Beam Clamps with Ground Wire Hole
A tin-plated bronze casting with teeth; brass hex thru-bolt with hole, brass set screw, and bronze lock washer.
Features and Benefits:
J-WPBC S1/4-20 Threaded Pressed Beam Clamp
Provides a mounting base for quickly and easily fastening cable management hardware to an I-beam or girder
Features:
High-strength, zinc-plated pressed...
Klein Open Jaw Cable Cutter 63711 High-leverage ratchet mechanism for single-handed cutting of up to 600 MCM copper and 750 MCM aluminum without burrs or sharp edges.
Front loading jaws...
Greenlee CSJ-100 Open Jaw Clampmeter
AC amperage, AC/DC voltage measurement
Open jaw design eases AC current measurement
Slim profile with build-inprobe storage on back
Measures resistance up...
