Power Actuated Angle Clip with 1/4-20 Threaded Eyelet

Angle Clip with 1/4" Hole and 1/4-20 Threaded Eyelet The angle clip can be used for threaded rod or to hand a bridle ring or wire. 90 Degree Angle clip 1/4" Hole 1/4-20 Eyelet

1/4-20 Female Threaded Screw in Eyelet Powder Actuated Shot Use for screwing in 1/4-20 down rod Idela for use with 1/4-20 bridle rings

J-JH64ACPA 4" J Hook with Angle Clip and Nail Features: Pre-galvanized Steel Bendable tab for securing wires Angle Clip has a preset 1 1/4" for powder actuated and gas guns 300 4-Pair UTP CAT...

Bridle Ring 1-1/2" Loop Machine Screw 1/4-20 Thread 1-1/2" loop size machine screw thread bridle rings with a 1/4-20 threaded leg are used to support communications cables and other low voltage...

J-JH96ACM-24 6" J Hook with Angle Clip and Hammer on Flange 1/8" to 1/4" Features 6 Inch Data J Hook Pre-galvanized steel Hammer on clip for 1/8” to 1/4” flanges Rotate up to 360...

Bridle Ring 4" Loop Size Machine Screw Thread With 1/4-20 Threaded Leg 4" loop size machine screw thread bridle rings with a 10-24 threaded leg are used to support communications cables and other...