Ribbon Series Fiber Fusion Splice Protection Sleeve 4.9 X 4.4mm After Shrink 40mm Length
- Brand
- Splice Technologies
- SKU:
- MFSS-SQ40
- Condition:
- New
- Minimum Purchase:
- 250 units
- Shipping:
- Calculated at Checkout
Ribbon Series Fiber Fusion Splice Protection Sleeve 4.9 X 4.4mm After Shrink 40mm Length
Features:
- Single Glass Member
- Bellcore GR-1380 Compliant
- RoHS & REACH Compliant
- Outer tube meets SAE AMS-DTL-23053/5 Class 2
- Inner EVA meltable adhesive tube
- Full length strength member for total fiber support
- Close dimensional tolerances
- Open ended assembly minimizing possibility of air entrapment during shrinkage
- Operating Temperature Range -55°C to +110°C
- Packaged in 25 per bag
"Ribbon" fiber series fusion splice protection sleeve is designed to accommodate 2 - 12 ribbon fiber. Stock lengths are 40mm, but are also available in a new 30mm length for smaller packaging requirements.
This product is constructed with an inner EVA meltable adhesive tube, a polyolefin heat shrink outer tube and either single or dual strength members. Our single strength member sleeve which has become an industry standard, has an after shrink diameter of 4.9 X 4.4mm, and utilizes a special glass member. Our dual strength member sleeve is designed to "sandwich" the ribbon, thus eliminating any undue stress on the fiber, and has an after shrink diameter of 5.7 X 4.9mm.
This option is available in a variety of glass and special high temperature plastic member combinations. The tubes are clear to allow viewing of the fiber during and after splicing. The entire assembly is designed to ensure that all members maintain perfect alignment during shipping, handling and shrinking. We are proud to say that all of our products are made here in the USA and most sleeves are in stock ready for immediate delivery.
Comparable to Sumitomo FPS-06-5P-250