VGA Extender over Category 5E or Category 6 Passive up to 100' Pair

Write a Review

$15.95

Transmit VGA signals up to 100' using Category Cable

Use this adapter along with CAT5 cables to extend VGA video signals up to 100ft (66ft over Category 5E, 100' over Category 6)
Save money by using a CAT5 cable versus a VGA cable
Makes running cables easier due to RJ45 being thinner
Requires no external power
Connects VGA female to RJ45 male

Notes:

Make sure that the your connection works over regular VGA cable
For the long runs try to avoid jack connections, for the best result use straight network CAT5E cable
CAT5E cable may be affected by close proximity of fluorescent fixtures. If possible, keep it at least 2 feet (0.5 meters) away
You CAN NOT use a switch, router or hub to transmit video using these adapters
DO NOT use crossover network cable. Use either 568A, or 568B wiring on both ends
If connecting to a TV with VGA PC Input, and there is the message Unsupported PC Signal check your manual for maximum or fixed resolution of your TV PC input. In most cases it is 1024x768. The other way to test the limits is to lower your PC video card resolution to 800x600, then gradually increase it. Some TV's and monitors require fixed resolution of the video card in order to display picture.