Viking Electronics PA-IP SIP Multicast Paging Adapter & Amplifier

Viking Electronics PA-IP SIP Multicast Paging Adapter & Amplifier

The Viking model PA-IP SIP / Multicast Paging Adapter provides an interface between new VoIP phone systems (hardware or hosted / cloud based) and analog paging systems, eliminating the need for an ATA or FXS port. The PA-IP can be used for standard SIP endpoint paging or multicast paging and background music.

The unit easily connects with a single CAT5/6 cable from your PoE switch. An auxiliary trigger input allows an optional hard wired switch or phone system trigger output to enable loud ringing / night bell from after hour incoming calls. Line-level audio output connections are provided for connecting to an external amplifier.

A built-in 6 Watt class D amplifier with speaker output connections is also provided to drive up to 6 analog 8 Ohm speakers. A programmable relay output is provided for triggering external amplifiers, etc.

• PoE powered (class 3, <13 Watts)
• Paging prioritization
• Plays audio from multicast
• SIP endpoint or multicast group member
• Supports up to 10 multicast paging groups
• Red “Page / Status” LED indicator
• SIP compliant (see product manual for list of compatible IP-PBX phone systems)
• Network downloadable firmware
• Autoprovisioning via Viking programming software
• Built-in high efficiency 6 watt class D amplifier
• Relay for activating door locks, strobe lights, external amplifiers, etc.
• SIP / Multicast: SIP page, SIP page and zoned multicast stream, zoned Multicast receive
• Support for access code to prevent unwanted SIP calls
• Line-level audio output for connecting to an external amplifier
• Network remote volume control
• Can drive up to 6 external analog 8 Ohm speakers
• Diagnostics (for testing the relay)