Top 5 Sensors That Work with the Honeywell Vista 20P Control Panel

Honeywell Vista 20P is compatible with lots of premium quality Honeywell products that can significantly enhance the security of your alarm system. Among various types of products, Vista 20P is compatible with a wide range of sensors manufactured by Honeywell.

Following are top 5 sensors that work with Honeywell Vista 20P control panel:

1.Honeywell Aurora

Honeywell Aurora is a state-of-the-art pet immune motion detector. This passive infrared detector can be hardwired to Vista 20P. To protect against false alarms by animals and pets up to 40 pounds, Honeywell Aurora features split-zone optics technology. The coverage range of the Aurora is approximately 35 x 40 ft. The range extends in a 90° pattern. Thanks to its versatile design, Honeywell Aurora is a great choice for most residential and commercial indoor applications. The overall design of the Aurora is sleek and small which allows this sensor to blend seamlessly with any décor. You can use it in both corner mount and surface mount installations.

2.Honeywell DT7435

Honeywell DT7435 isn’t an ordinary motion detector. It is a DUAL TEC sensor that combines the microwave and passive infrared technology to offer the best detection possible. DUAL TEC is the trademark name of Honeywell. The company named it as it was the first manufacturer to combine both technologies in a single device. One key advantage of using a DUAL TEC motion detector is that you will less likely to see a false alarm getting triggered. DT7435 senses a change in the ambient temperature of the room in which it is installed in by using the PIR technology.

3.Honeywell FG1625

Honeywell FG1625 is a high-end sensor that can detect glass break. You can add this glass break detector to Vista 20P without any hassles. FG1625 monitors the frequency of broken glass, allowing an extra layer of protection for your windows. FG1625 can be mounted on various locations including the wall adjoining the glass, wall opposite the glass, as well as ceiling. FG1625 is efficient and accurate thanks to the use of FlexCore signal processor. This technology also minimizes false alarms.

4.Honeywell IS215T

IS215T is another premium quality PIR motion detector by Honeywell. Suitable for both residential and commercial applications, IS215T can be installed with Honeywell Vista 20P control panel. Thanks to easy corner mounting knockouts, you can mount this motion detector in a corner or on the wall with ease. Keep in mind that you will need a four-wire connection in order to connect this sensor with your Honeywell Vista 20P control panel.

5.Honeywell FG1625RFM

Honeywell FG1625RFM is a high-end glass break detector that is designed to easily and quickly be recessed into one diameter hole in the wall. Because of this, the FG1625RFM is easy to hide. This high-quality glass break detector has four sensitivity settings that you can set by using the dip switches. These sensitivity settings allow you to install the FG1625RFM to match the acoustic features of the room, distance to the detector, and types of windows to be protected.